Equipment cleaning and maintenance

Step 1 — Remote study with guided digital material

Maintaining and cleaning response equipment during and after an oil-spill operation, so that vessels and gear can return to duty quickly and safely.

LESSON 1

Maintenance and choosing a washing site

Maintenance of response equipment and vessels means keeping equipment operational throughout a spill response and cleaning contaminated gear. A particular challenge is that some equipment may have stood unused in storage for a long time before being deployed. When an accident occurs, the equipment is put into intensive, long-term use and is expected to work in all conditions.

Equipment requiring maintenance includes oil-recovery vessels and response gear such as hand tools, recovery equipment, and boom and buoy equipment. Trailers and transport platforms for boat equipment may also need cleaning during the response. Maintenance during an operation includes cleaning and washing, as well as checking and maintaining operational condition. At the end of a working day, or after the operation, equipment is stored and protected, and returned to its original location restored to its normal state of readiness.

Response vessels and equipment become contaminated and develop faults during an operation. They should be moved to shipyards and maintenance sites in a way that causes as little further damage to the environment and extra work for the response organisation as possible.

Equipment should also be able to return to its response task as quickly as possible. It is not always sensible to move equipment elsewhere; it can instead be serviced within the response area. In general, the maintenance process during a response proceeds as follows:

Minor equipment faults and routine maintenance are handled within the response area. For larger maintenance work, equipment is cleaned and transported to a repair site. Vessels and equipment are lifted from the water and packed as carefully as possible for transport, to minimise further damage. Equipment is delivered for washing to an existing shipyard or washing site, or to an area established specifically for that purpose.

Washed equipment is transported for servicing to the equipment manufacturer or to the rescue department's depot. Rescue departments mainly service their own oil-spill equipment and have their own staff responsible for maintenance; external purchased services are used for larger repairs. Some rescue departments also outsource oil changes and certain minor maintenance work. Manufacturers mainly service skimmers and brush washers.

During operational maintenance and equipment washing, existing washing halls, ports and shipyards licensed to handle oily waste should be used wherever possible. The site must be able to handle wash water quickly and without difficulty, so that collecting the water does not delay the equipment's return to the response task.

Where no suitable existing washing site is available, temporary washing facilities must be built for the duration of the response work. A washing line can, for example, be built on an asphalted area under a tarpaulin hall, applying the protective measures used for temporary storage. The base must be sealed with an oil-impermeable material, and wash-water recovery must be arranged.

LESSON 2

Washing oil-spill response equipment

Heavily contaminated equipment and vessels are cleaned with alkaline solvents, which are strongly alkaline and remove oil and grease effectively. The solvent used should be suitable for washing difficult oily surfaces, mix well with water, and thereby ease recovery of the chemical. For small equipment, such as cleaning oil-resistant boots, soapy water has proved to be an effective cleaning agent.

Cleaning chemicals should be environmentally friendly wherever possible. Workers must protect themselves appropriately. Resulting wastewater is led to an oil-separation well or collected. After using strong detergents, the tanks, hoses and nozzles of pressure washers must always be flushed thoroughly before storage. When selecting detergents, it must be ensured that they are suitable if the water is led to an oil separator, since some detergents break oil into droplets so small that removing it from water becomes impossible.

Mechanical cleaning means washing equipment and vessels by hand using a brush, solvent and water. A high-pressure washer is used for water washing. Its advantage is the small amount of water it uses compared with unpressurised rinsing, which does not needlessly increase the volume of waste. A further advantage of the high-pressure washer is its direct cleaning effect: water striking the surface under pressure loosens dirt.

Boom surfaces must never be cleaned with a steel scraper or steel brush. The boom surface must otherwise be handled with care and must not, for example, be dragged along the floor of the washing site.

A boom is preferably washed while hanging, using a pressure washer. Diluted detergents should be used, and the detergent solution allowed to act before the actual washing. Washing and rinsing must be carried out carefully, since oil or washing solvent left in a boom's folds may embrittle the boom material, particularly its seams and stitching. After washing, booms are kept hanging in an airy, ventilated space, protected from UV radiation. It should be noted that some booms have a structure that is sensitive to damage in cold conditions. Boom-washing equipment held by rescue departments, such as washers built into containers from which oily water can be easily recovered, can also be used.

When cleaning vessels and boats, the worst dirt and oil are first scraped off with scrapers. Solvent is then applied, the surface is brushed with a coarser brush and rinsed with a high-pressure washer, starting at the bottom with horizontal strokes and working up the side. After rinsing, the previous washing step is repeated using a soft brush. Open vessels' interior spaces are treated the same way as the exterior surface. Cleaning a vessel takes an estimated two working days, including the time needed for lifting and transporting it.

LESSON 3

Maintenance during an oil-spill response operation

As equipment arrives at the maintenance point, it is sorted by type into its own areas. It is further divided into equipment to be washed (good condition or repairable) and equipment to be discarded. Washed and dried equipment is inspected carefully; some of it may still be sent for disposal. Minor faults and deviations are corrected at the maintenance point, and the equipment returns to the worksite or storage. New items are procured to replace discarded equipment and used spare parts.

The time required for maintenance can be difficult to estimate. In damage situations, almost without exception some part has broken so badly that it cannot be repaired and must be replaced with a new one. Maintenance staff should, as a first step when an accident occurs, check the availability of spare parts essential to operating the equipment and prepare for their consumption.

  • Boom and buoy maintenance: repairs must always use the boom's own spare parts and the manufacturer's instructions; consult the manufacturer for larger repairs. Boom connectors, tow heads and ropes must be checked after every use, and at least once a year in any case. Buoys must also be inspected. Light buoys must be stored with power sources kept separate. Single-use response equipment, such as oil-protection mats and absorbent materials, is treated as waste, for example by incineration.
  • Pump and skimmer maintenance: skimmers are inspected at least once a year. Flotation equipment and pump operation are checked after every use. Pumps must not be left with water inside during storage. Pumps used in seawater should be flushed by running them for 15–30 minutes with fresh water containing, for example, antifreeze to prevent corrosion. Brush condition must be checked, with particular attention to the cleanliness and condition of hydraulic hose couplings and valves. Pump rubber seals are treated with silicone oil.
  • Power unit maintenance: maintenance must follow the manufacturer's instructions, checking and topping up lubrication, hydraulic fluid and fuel levels as needed. Equipment fuel tanks should always be kept full. Combustion-engine cooling-water systems must contain antifreeze mixtures.
  • Transfer hose maintenance: where possible, transfer hoses should be stored straight. If hoses must be stored coiled, the coil diameter must be as large as possible with no sharp bends. Hoses of different rubber types (different colours) should not be stacked on top of each other in storage. Bending cold transfer hoses should be avoided, as cold rubber products are easily damaged by bending. Used hoses are rinsed thoroughly and dried properly. Talc, for example, can be blown onto the inner surfaces of a transfer hose for storage. The condition of hoses' outer and inner surfaces and the fastenings of connectors must be checked.
  • Container, pallet and tank maintenance: the condition of container roof-tarpaulin tie-down cables, and of door hinges and rubber seals, must be checked. On pallets, the condition of the side and tailgate hinges must be checked. Tank valves and filling pipework must be checked after every use. Bulk bags and floating tanks must be stored on their own platforms, protected from UV radiation. Fold lines in bags should be varied to prevent cracking. Bags must not be dragged along the ground or the storage floor.
  • Vessel maintenance: maintenance of oil-spill response vessels is the responsibility of the vessel's master. Loose equipment moved onto vessels is the responsibility of the regional depot that supplied it. Maintenance of work boats, liaison boats and similar craft on the regional depot's books is the depot's responsibility. Riveted and welded joints on aluminium boats should be visually inspected once a year.
  • Other maintenance: the lights and tyres of trailers must be checked at every use. Outboard-motor oil and the engine's protective oil are changed, and spark plugs and the propeller are checked. Outboard-motor batteries are stored in the depot's battery room. Maintenance and inspection actions must be recorded in the engine's own service log. The hoses and spray-gun nozzles of pressure and hot-air washers must be checked; after strong detergents are used, washer tanks, hoses and nozzles must always be flushed thoroughly before storage. Oil separators must be emptied for the duration of storage and their tank spaces flushed thoroughly, with attention to valve condition and the condition of connector rubber seals. A separate service log is kept for battery charging and maintenance; batteries in storage are kept clean, with a good storage temperature of 0–15 °C, and each battery is marked with the equipment it belongs to.

LESSON 4

Maintaining the operational reliability of oil-spill response equipment

Oil-spill response equipment should be stored appropriately, preferably in a space protected from moisture. Storage must follow the manufacturer's instructions and recommendations, particularly regular inspection and maintenance of power units. Measures may include checking and maintaining battery charge, regularly starting diesel-driven hydraulic power units and running them for 15–30 minutes, and regularly checking hydraulic connections and hoses.

Sufficient spare parts should be available for oil-spill response equipment. Appropriate spare-parts packages are available from several manufacturers, allowing routine and in-service maintenance to be carried out without having to order parts specially because none were held in stock.

Review questions

For self-study only. Answers are not recorded.

  1. 1. What challenges can arise for the functioning and maintenance of response equipment during an oil-spill operation?

    Select all that apply.

    Answer key awaiting instructor review.

The certificate is issued after both the practical exercise and the final exam.