Oil sampling and documentation
Step 1 — Remote study with guided digital material
Taking and documenting oil samples correctly and promptly, so that evidence remains valid for forensic investigation.
LESSON 1
Sampling
Oil samples should be taken as soon as possible after a discharge occurs, or as soon as oil is observed, because the composition of oil changes when it comes into contact with water or soil. Light oil products, such as motor petrol and light fuel oil, evaporate readily from a water surface or a solid surface. Motor petrol evaporates within a few hours and light fuel oil within a day, depending on weather conditions.
When taking samples relating to environmental offences, it must be remembered that substances released into the environment can be harmful, or even hazardous, to health. Protective clothing, disposable gloves and, where necessary, respiratory protection must be worn when taking samples.
Sampling equipment must be cleaned carefully or disposable equipment used. Samples should be taken from several different points across the discharge area, since the composition of the oil may differ at the edges and in the middle of the area. It can be difficult to prevent water and soil material from entering the sample. The sample should be checked to confirm it contains 10–100 ml of oil; even a smaller sample amount is still worth sending for analysis. The sample container must be made of glass or wide-mouthed HDPE plastic. The cap should be polyethylene and contain a Teflon or aluminium film. Samples must be stored in a refrigerator at approximately +4 °C.
When oil forms a thin film on the water surface, taking a sample with a container is difficult: the oil retreats ahead of the container, and the sample often ends up being only water. The oil film is best collected using an absorbent net. The net is lowered onto the water surface on a line or wire and absorbs only the oil, none of the water. An ETFE net (ethylenetetrafluoroethylene), developed as a Nordic collaboration project, is recommended as the absorbent material. After sampling, the net is packed in an arson-evidence bag or in one of the containers described above. Sampling kits, which include an absorbent net together with a curtain clip and line, can be ordered from the Police Materiel Centre, Vuorikatu 1, 45100 Kouvola.
- Sample containers are placed in arson-evidence bags or packed in a box lined with plastic.
- A single postal parcel may contain containers holding at most ½ litre of oil each, so that the parcel as a whole contains no more than one litre of oil in total.
- Sample containers are filled to at most three-quarters of their volume to allow for possible thermal expansion.
LESSON 2
Sampling checklist
The following points should be observed when taking oil samples.
- Sampling equipment must be cleaned carefully.
- Sample quantity should be 10–100 ml of oil.
- The sample should be taken as soon as possible after the discharge occurs.
- Several samples should be taken.
- The sample container should preferably be glass or HDPE plastic, 250 ml in volume, with a wide mouth and a polyethylene cap containing a Teflon or aluminium film, and should be fillable to three-quarters of its volume.
- Samples are delivered to the police forensic laboratory as soon as possible.
- Samples are stored in a cool place (below +4 °C, in a refrigerator; they must not be frozen).
LESSON 3
The ETFE net and its use in sampling
The ETFE net is individually packed in plastic bags and heat-sealed. Each pack also includes a curtain clip and a line.
Only handle the net with clean hands or disposable gloves, since the net readily absorbs any oily substance. Use only clean, unused nets for sampling.
Take the net from the bag and attach the line to it with the curtain clip. Cast the net at the target, for example using a fishing lure as an aid. The net can be floated back and forth over an oil slick, for example, to collect a sample, or it can be lowered on the line into, for example, a tank. Casting a light net can be made easier by adding, for example, a fishing weight to the curtain clip. On a flat surface, an oil sample can be taken by wiping with the net. The net containing the sample is detached from the curtain clip and packed in an arson-evidence bag, which is sealed carefully.
LESSON 4
Documentation
Every sample must be documented fully so that it remains admissible as evidence.
- Sample number
- Sampling date and time
- Exact sampling location
- Wind direction and strength, air and water temperature (if possible)
- Sampling method
- Appearance of the sample
- Any deviations occurring during sampling
- Sampler's name, address and telephone number
- Signature
LESSON 5
Address for sending samples
If samples are sent to the National Bureau of Investigation's Forensic Laboratory, samples are received on weekdays from 08:00 to 16:00 at Jokiniemenkuja 4, 01370 Vantaa.
NBI laboratories, PL 285, 01301 Vantaa.
Review questions
For self-study only. Answers are not recorded.
1. Why should oil samples be taken as soon as possible after a discharge occurs, or as soon as oil is observed?
The certificate is issued after both the practical exercise and the final exam.