Interim storage of recovered oil and waste sorting
Step 1 — Remote study with guided digital material
This section explains how oil-spill waste must be sorted, what determines the quantity and type of waste produced, and how waste generation can be minimised during a response operation.
LESSON 1
Sorting waste
Sorting of the different waste fractions must be attended to from the collection stage onward. Sorting makes waste treatment easier at a later stage of the transport chain. Waste collection must also be sufficiently selective, so that unpolluted soil material does not end up in waste treatment.
Waste generated in an oil spill is sorted into four waste fractions:
- oil–water mixture
- oily soil material
- oily mixed waste (for example protective gloves and coveralls, sorbent booms and mats)
- risk waste, i.e. waste with a risk of infection (for example dead birds)
LESSON 2
Further sorting for treatment
For further treatment, it is sensible to also sort oil-spill waste according to its oil content. QR-coded instructions have been created to make sorting easier. Most of the sorting of fractions happens naturally at the time of collection. The oil–water mixture is generally pumped into tanks or a tanker truck. Contaminated soil material is dug with a spade or excavator directly onto the bed of a lorry.
- Sort waste immediately as it is collected, or otherwise at the start of the response operation
- Divide oil-spill waste into fractions for which a suitable treatment method exists
- Keep sorted waste fractions separate from one another throughout the waste management chain, from sorting to treatment
- Also sort unoiled mixed waste
- Mark the names of waste fractions clearly on waste containers, for example with a laminated paper label and, where possible, colour coding; the marking showing the container's contents must be visible from every direction
- QR codes, for example, can be used in sorting instructions
- Transport units can also be marked with an RFID tag or similar
- Provide the collection site with, for example, a roll-off container fitted with a 6–8 cubic metre solid-waste bin; a unified unit is easier to move, and each waste fraction has its own container, with several for soil material, which accumulates in the greatest quantity
LESSON 3
Oil-spill waste
The quality and quantity of the oil-spill waste generated is affected by numerous factors.
- the amount of oil that has leaked into the water
- the success of oil-spill response and containment on the water
- how the oil has transformed (evaporation, emulsification, sinking)
- the spread of oil and the extent of oiled shoreline, and the number of islands and skerries
- the terrain and ground of the oiled shoreline (smooth rock, boulder field, stony ground, sand, silt, mud)
- the amount of shoreline vegetation
- the number of dead birds and animals
- the amount of oily water waste collected
- the shoreline clean-up method used: manual, mechanical, by flushing
- the method used to remediate contaminated soil
- the organisation, guidance and implementation of oil-spill waste collection
- the required clean-up standard for shoreline areas
- the point at which oil-spill waste collection begins
LESSON 4
Minimising waste quantities in oil-spill response
In response work, the principle of waste minimisation is followed in accordance with the Waste Act (646/2011). Under the waste hierarchy in the Act, the first priority is to prevent waste from being generated. Recycling waste as a raw material for new products is only secondary. Incinerating waste is only appropriate if the waste cannot be prevented or recycled.
Waste minimisation is pursued in the planning of response tactics, collection methods, maintenance and logistics. Response measures aim to prevent uncontrolled stranding of oil on shore wherever possible. The stopping point is protected with a shoreline protection mat or boom before oil is directed to shore. Oil is collected from the water where possible, and the oil–water mixture is separated by gravity.
Selective collection methods, such as manual collection or washing techniques, are favoured in shoreline clean-up. Sorbent materials are used only in appropriate quantities.
Further damage is prevented by protecting collection sites and waste treatment areas. Maintaining the boundary between the dirty and clean areas prevents oil from spreading further with responders or equipment.
Waste sorting is attended to throughout the transport chain; sorting responsibility is clearly assigned and instructions are given to everyone taking part in the response operation. All suitable equipment, collection tools and gear are washed and reused, or stored for future need.
The usefulness of washing must be assessed from the point of view of overall benefit, since washing produces oily water. Equipment can also be cleaned by wiping with sorbent cloths, which likewise produces oily waste.
Transport and intermediate storage units for oil waste are protected from rainwater and birds. Intermediate storage follows the instructions of the environmental authorities, and the waste is delivered for treatment to licensed facilities.
Review questions
For self-study only. Answers are not recorded.
1. What kind of waste can be generated in an oil spill?
Select all that apply.
2. Which of the following statements are correct?
Select all that apply.
Answer key awaiting instructor review.
3. What can be assumed about the quantity of waste?
Select all that apply.
Answer key awaiting instructor review.
The certificate is issued after both the practical exercise and the final exam.